Important: this page is a plain-language summary for people ordering labels. It is not legal advice and does not guarantee code compliance. Requirements depend on the NEC edition adopted where you work, local amendments (in Washington, the Department of Labor & Industries rules) and your authority having jurisdiction. Read the official text at nfpa.org.
Circuit directories (NEC 408.4(A))
In the 2023 NEC, every circuit and circuit modification in a panelboard is to be legibly identified by its clear, specific purpose, including spare positions with unused breakers. The directory goes on the face of, inside of, or in an approved location next to the panel door. Descriptions should not depend on who happens to occupy a room, and abbreviations and symbols should be explained.
Source of supply (NEC 408.4(B))
For switchboards, switchgear and panelboards supplied by a feeder in buildings other than one- and two-family dwellings, the 2023 NEC calls for a permanent marking that identifies where the power comes from and where that source is physically located. The label is to be permanently affixed, durable enough for the environment and not handwritten. That is why many contractors use engraved panel ID labels such as PANEL LP-2 / FED FROM MDP, ELEC RM 101.
Disconnects (NEC 110.22(A))
Each disconnecting means is to be legibly marked to show its purpose unless that is evident. In other than one- or two-family dwellings, the marking also includes the identification and location of the circuit source, unless that is evident. The marking needs to be durable enough for the environment.
Field-applied hazard markings (NEC 110.21(B))
When the code calls for a field-applied warning label, it is generally expected to be permanently affixed, durable for the environment and not handwritten, with suitable warning words and colors. Engraved signs are one durable option; the wording and any calculated values (such as arc-flash data) must come from your project team.
How Crystallized fits in
Crystal engraves exactly the wording you supply, in the size, color and mounting you choose. Use the Trade Label Designer or read How to label an electrical panel.

